The yard

Yacht builders, shipbuilding roots.

Magnolia Yachts was established in 2019 as a standalone line dedicated to yachts. It builds yachts with access to Yardımcı Group facilities and capabilities, and with the passion, know-how and skills perfected building ships that roam every corner of every ocean.

Turkter Facility, Tuzla

How we build

Built like a working ship. Finished as a yacht.

A merchant ship is judged by whether it keeps working. Systems must be reachable, critical gear duplicated, and every weld open to class survey. Magnolia Yachts applies that discipline to yachts, with the passion, know-how and skills perfected on ships that work every ocean, then adds the joinery, paint and detail an owner lives with.

Access to the Yardımcı Group's commercial newbuild capacity gives Magnolia Yachts steel and aluminum structure at scale, while the yacht line dedicates itself to finishing each yacht to the standard the series demands.

01

Capacity

Covered halls, heavy lifting and berthing sized for merchant programs, with room to build Magnolia yachts in parallel without compromise.

02

Capability

Class-supervised structure, controlled coating and documented systems. Commercial yard routines, applied hull after hull.

03

Yacht finish

Joinery, paint and detailing to the standard owners expect, finished by people who build Magnolia yachts.

Four generations

At the helm.

Nearly eighty years of shipping, and the owning knowledge behind seventy-four ships, go into every Magnolia yacht, held to the detail an owner expects.

The family and the craft

The story of Magnolia is a family choosing to hand a demanding craft to its next generation. Shipbuilding taught them that beauty without discipline does not last. Yachts ask for both, and for the courage to get every hard detail right.

Hasan Kemal Yardımcı opened Magnolia with that in mind. Gökhan and Turhan lead the programs and the owners. Aslı joins for the interiors that are hers. Continuity, pressure, and a finished vessel that earns its keep: that is the work.

Hasan Kemal Yardımcı

Founder and Chairman

Hasan Kemal Yardımcı

Hasan Kemal Yardımcı is founder and chairman of Magnolia Yachts. A civil engineer, industrialist, and shipowner, he brought the family's shipping and shipbuilding work into yacht construction when he established the yacht division in 2019.

Born in Rize in 1950, he trained as a civil engineer at the Istanbul State Academy of Engineering and Architecture (Vatan Engineering School). He has led Yardımcılar Holding A.Ş. as chairman of the board. He has served on the boards of the Turkish Shipowners' Association and the Turkish Shipbuilders' Association (GİSBİR), and as a council member of the Istanbul Chamber of Shipping. He served as Honorary Consul General of the Bahamas in Istanbul.

He was a member of the Turkish Grand National Assembly for Istanbul from 2007 to 2011 and chaired the National Defense Commission. He served as Deputy Minister of National Defense from 2011 to 2015.

Maritime education is part of the same work. In Rize, the Hasan Kemal Yardımcı Maritime Vocational and Technical Anatolian High School carries his name and trains deck officers, engineers, and seafarers. That is how he has long treated the trade: skill is taught, then used.

He treats the shipyard as a place where that knowledge is handed on. He is there every day, working with his children and the workforce, passing on what he has learned and holding the same standard he has kept in shipping: the relationship with the client is part of the vessel. Dedication to that work is how he leads.

Nothing leaves the shipyard without his final quality check.

Gökhan Yardımcı

Managing Partner

Gökhan Yardımcı

Gökhan Yardımcı is managing partner of Magnolia Yachts and a fourth-generation Yardımcı in shipping and shipbuilding. He studied and worked in Italy and Germany. That time in European yards and studios is how he reads a build with international naval architects, owners, and suppliers, and how he carries Magnolia into those rooms.

He has more than twenty-five years in the field. From the shipyard he directs the build programs, including the Magnolia 41 m developed with Gregory C. Marshall N.A. Ltd. With Turhan and Aslı he managed the build of Magnolia One, the 24 m delivered in 2022. He is advancing the MY41 and MY28 lines.

Turhan Yardımcı

Director

Turhan Yardımcı

Turhan Yardımcı is a director at Magnolia Yachts and a fourth-generation Yardımcı. He holds a BSc in Management Sciences from the London School of Economics. He spent four years in ship management in Denmark and Ireland. The degree and those years abroad are how he runs project control, owner reporting, and commercial follow-through to the standard international clients expect.

He has more than twenty years in shipping and shipbuilding. On Magnolia One (MY2401), the 24 m that opened the division, he managed the build with Gökhan and Aslı. That program set how the family works a yacht through the shed. He remains in the front office at the shipyard and works with Gökhan on the current build programs.

Aslı Yardımcı Hotiç

Interior Designer, Magnolia One

Aslı Yardımcı Hotiç

Aslı Yardımcı Hotiç is an interior designer. She studied at the London School of Design. That training is how she specifies material, finish, and living space in a language owners and European studios already use, and how a Magnolia interior holds up next to work from outside Turkey.

On Magnolia One (MY2401) she designed the interior with Atilla Eren, a credit confirmed in the press, and worked the build with Gökhan and Turhan. Delivered in 2022, that interior set how Magnolia presents living space aboard. She joins Magnolia projects when the interior is the right fit.

The yards

Where Magnolia builds.

Structure at Turkter Facility, Magnolia's large-capability yard. Finish and interiors in a new house nearby, built for yachts alone.

Turkter Facility.

Turkter Facility has been part of the Yardımcı Group since 2004. It builds merchant ships for foreign owners, and builds and maintains yachts up to 80 metres. Magnolia Yachts, established in 2019 as a line dedicated to yachts, builds here with access to that capacity.

For every Magnolia yacht, this is where the heavy work is done: steel and aluminum structure, hull construction and heavy fabrication, with the lifting capacity, covered halls and class routines of a yard that still builds tankers. Select an area of the photograph to see what it can do.

Aerial photograph of Turkter Facility, looking out to sea: the slipway and gantry crane at top left, the portal-crane assembly area at left, and the covered fabrication and paint halls at right
Turkter Facility

Explore the yard

Select a number on the photograph, or an area below.

Outside the frame: outfitting berths

Beyond the top of the photograph, two lay-by berths run out into the sea for outfitting afloat. Four vessels can lie alongside at once, served by a 40 tonne jib crane and a 10 tonne tower crane, with water depths on the plan of 5.5 to 9.2 metres.

Production area49,202 m², of which 18,695 m² covered
Slipway192 m × 36 m
Lifting25 cranes, including a 400 t gantry, 40 t jib cranes and 10 t tower cranes on the pier
BerthingTwo piers, four vessels alongside at once
New-build capacity34,160 DWT a year
Coating2 indoor air-conditioned paint halls and a shop-primer unit
Management systemsISO 9001 · ISO 14001 · ISO 45001
Energy3,422 kWp solar power plant in Tokat, commissioned 2025
Labelled site plan of Turkter Facility: paint hall, production and CNC workshops, slipway with 400 tonne gantry, and two lay-by berths
Site plan Select to enlarge.

The yacht facility.

Magnolia Yachts is investing in a dedicated yacht facility, with covered halls within 2.5 kilometres of Turkter Facility.

It is designed to take several builds at the same time, on yachts up to 42 metres, and to bring interior building fully in-house, so cabinetry, panelling and finish work are made close to the hulls they are fitted to. The plans place offices and a design studio alongside climate-controlled production, with the interior and joinery workshop on the lower level.

Structure stays at Turkter Facility, where the heavy lifting and class routines already are. Finish, systems integration and interiors move to a house designed around them.

PurposeYacht construction and completion only
Yacht sizeUp to 42 m
CapacitySeveral simultaneous builds
InteriorsBuilt in-house
LocationWithin 2.5 km of Turkter Facility
Rendering of the new Magnolia yacht facility at night
The new yacht facility At night
Rendering of the new Magnolia yacht facility
The new yacht facility
Aerial rendering of the new yacht facility
The yacht facility from above

The family

On the water since the 1940s.

The Yardımcı family has been in Turkish shipping since the early 1940s. Over the generations it has owned or managed some sixty vessels, from containerships and bulk carriers to chemical and bunkering tankers. The Yardımcı Group itself was founded by Şevket Yardımcı in 1974.

In 1994 the group moved into shipbuilding by acquiring Yardımcı Shipyard, and in 2004 it added a second yard, Magnolia, where Magnolia Yachts builds today. The yards did not only build for others: two ships in the register carry the names Şevket Yardımcı and Sayinur Yardımcı. A family that puts its own name on its hulls is making a public statement about its standards.

Hasan Kemal Yardımcı opened the yacht division in 2019 with his sons. He has led Yardımcı maritime interests for decades, including more than thirty years as chairman of Yardımcı Shipping Group. He served as Honorary Consul of the Bahamas in Istanbul, as a member of the Turkish Grand National Assembly from 2007 to 2011, and as Vice Minister of National Defense from 2011 to 2015. Gökhan and Turhan lead the build programs and the front office; Aslı joins when the interior is hers to design. Quality sign-off stays with the founder. Continuity is the standard.

The record

Seventy-four ships.

The family's yards have delivered 74 newbuilds: chemical tankers, tugs, containerships and more. That commercial program is the capacity Magnolia Yachts draws on: welding discipline, piping quality and class scrutiny with no room for approximation.

74Newbuilds in the family register
55Built to ABS class
144mLargest ships, 17,000 dwt
8Flags

Fifty-five of those ships were built to ABS class, with the balance to BV, RS, GL, DNV, RINA and TL. Every one was delivered under survey.

More than half of the register went to clients who came back. One Danish owner took eighteen ships over twelve years. A French operator ordered seven. Tugs went to the Seychelles, a bunker tanker to the port of Auckland, a five-ship series to the Caspian.

Merchant ships built by the family's yards
The yards Ships built at the family's yards
  1. 1940s

    Into shipping

    The family enters Turkish shipping.

  2. 1974

    Yardımcı Group

    Founded by Şevket Yardımcı.

  3. 1994

    First yard, first ship

    Yardımcı Shipyard acquired. The first newbuild, a 343 TEU containership, follows the same year.

  4. 2001

    The first yacht

    A 24.6 metre motor yacht, the yards' first.

  5. 2004

    Turkter Facility

    The group's second yard acquired: Magnolia's current site and large-capability yard, home of Magnolia Yachts.

  6. 2007

    The largest ships

    144 metre, 17,000 dwt chemical tankers, delivered 2007 and 2008.

  7. 2008

    Steel explorer shell

    Steel structure and shell for a 45 metre explorer yacht, built for another shipyard, with metalwork quality at the forefront.

  8. 2015

    Sea-river tankers

    Five sea-river tankers join the family register. Shipbuilding continues under the Yardımcı family group.

  9. 2019

    Magnolia Yachts

    Hasan Kemal Yardımcı opens the yacht division with his sons Gökhan and Turhan. Magnolia Yachts becomes the family's dedicated yacht line; shipping and shipbuilding continue under the Yardımcı family group.

  10. 2022

    MY2401 delivered

    Magnolia One, the first MY24, built entirely at the yard.

  11. 2026

    Growing

    MY4101 in her final year of construction, the MY28 series under way, and investment in a new Magnolia yacht facility under way.

Visit Magnolia

The best way to judge Magnolia is to visit.